Notice ASROCK G31M-GS disponible gratuitement après inscription

Accédez à la notice du ASROCK G31M-GS en adhérant à la communauté.

Notice d’utilisation de votre ASROCK G31M-GS. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre G31M-GS.

Notices - manuels - modes d'emploi disponibles pour ASROCK G31M-GS après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

nced proprietary hardware and software design, Intelligent Energy Saver is a revolutionary technology that delivers unparalleled power savings. In other words, it is able to provide excep- tional power saving and improve power efficiency without sacrificing computing performance. Please visit our website for the operation pro- cedures of Intelligent Energy Saver. ASRock website: 12.Although this motherboard offers stepless control, it is not recom- mended to perform over-clocking. Frequencies other than the recom- mended CPU bus frequencies may cause the instability of the system or damage the CPU. 13.While CPU overheat is detected, the system will automatically shutdown. Before you resume the system, please check if the CPU fan on the motherboard functions properly and unplug the power cord, then plug it back again. To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system.99999 ASRock G31M-GS / G31M-S Motherboard Pre-installation PrecautionsPre-installation PrecautionsPre-installation PrecautionsPre-installation PrecautionsPre-installation Precautions Take note of the following precautions before you install mother- board components or change any motherboard settings. 1.Unplug the power cord from the wall socket before touching any component. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components. 2.To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. 3.H...

En cours...