Notice BEKO WMD67125 disponible gratuitement après inscription

Extrait de la notice

rain the water in the machine. Before starting this program, select the desired spin sped and press “Start/Pause/Cancel” button. Your machine drains the water after spinning at the set spin speed. If you only want to drain the water without spinning your laundry, select “Spin and Pump” program, and then select no spin function with spin speed selection button. Press “Start/Pause/Cancel” button.A You should use a lower spin speed for delicate laundries. Spin Speed selectionWhenever a new program is selected, the maximum spin speed of the selected program is displayed on the spin speed indicator. To decrease the spin speed, press the “Spin” button. Spin speed decreases gradually. Then, rinse hold and no spin options are shown respectively. Rinse hold is shown with “” and no spin is shown with “” symbols. If you do not want to unload your clothes immediately after the program, you may use rinse hold function in order to prevent your clothes become wrinkled in anhydrous conditions. With this function, your laundry is kept in the final rinsing water. If you want to spin your laundry that you left in water: - Adjust the spin speed. - Press “Start/Pause/Cancel” button. Program resumes. Your machine drains the water and spins your laundry. You can use no spin function in order to drain the water without spinning at the end of the program.7 - EN Program and consumption table • : Selectable * : Automatically selected, not cancellable. **: Energy Label programme (EN 60456) Water and power consumption and programme duration may differ from the table shown, subject to changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions, and fluctuations in the supply voltage. “Super 40” programme...