Notice BRAUN MD20

Notice BRAUN MD20 disponible gratuitement après inscription

Accédez à la notice du BRAUN MD20 en adhérant à la communauté.

Notice d’utilisation de votre BRAUN MD20. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre MD20.

Notices - manuels - modes d'emploi disponibles pour BRAUN MD20 après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

igators shall be used only with liquids defined in the manufacturer’s instructions. •Use this product only for its intended use as described in this manual. Do not use attachments or chargers which are not recommended by the manufacturer. WARNING • If the product is dropped, the brush head should be replaced before the next use even if no damage is visible. • Do not place the appliance in water or liquid or store where it can fall or be pulled into a tub or sink. Do not reach for it when fallen into water. Unplug immediately. • Do not disassemble the product. • When unplugging, always hold the power plug instead of the cord. Do not touch the power plug with wet hands. This can cause an electric shock. • If you are undergoing treatment for any oral care condition, consult your dental professional prior to use. Description a Irrigator jet b Jet compartment c Jet release button d On/off switch e Water pressure control dial f Handle switch (water stop and go) g Irrigator handle h Water container (600 ml) i Cord storage Specifications For voltage specifications please refer to the bottom of the charging unit. Using the irrigator Before using for the first time, fill the water container (h) and allow the water to run through completely by holding the irrigator handle (g) over a washbasin. 1. Attach one of the irrigator jets (a) to the handle until it locks into place (1). Fill the water container with lukewarm water. If you want to add mouthwash into the water, please make sure you fill the water container with lukewarm water first, then add the mouthwash. 2. Turn on the irrigator by pressing the on/off switch (d) (2). When doing so, the handle switch (f) should be in the lower position = water stop). 3. Select t...

En cours...