Notice BROTHER PT-2460 disponible gratuitement après inscription

Extrait de la notice

t into use. Notes on tape cassettes ?Before installing the tape cassette, make sure that the end of the tape feeds under the tape guides. If the tape cassette to be installed has an ink ribbon and the ink ribbon is loose, use your finger to wind the toothed wheel in the direction of the arrow on the cassette until there is no slack in the ribbon. ?When inserting the tape cassette, make sure that the inner ribbon does not catch on the corner of the metal guide. ?After installing a tape cassette, press f once to remove any slack in the tape, and then press in on the tape cutter button to cut off the excess tape. ?Always cut off the tape before removing it from the machine. If the tape is pulled on before being cut off, the tape cassette may be damaged. End of the tapeTape guides6 Strong Adhesive Tape ?For textured, rough, or slipping surface, we recommend using Strong Adhesive Tape. ?Although the instruction sheet included with the Strong Adhesive Tape cassette recommends cutting the tape with scissors, the tape cutter that this P-touch is equipped with is able to cut Strong Adhesive Tape. Flexible ID Tape ?For applications that require more flexible labels, such as around sharp bends and cylindrical objects, we recommend using Flexible ID Tape. ?Labels made with Flexible ID Tape are not designed for use as electrical insulation. ?When wrapping labels around cylindrical objects, the diameter of the object should be at least 3 mm, otherwise the label should be wrapped as a flag and the FLAG Label Type mode should be used. In addition, the overlapping ends of the label or the label flag should be at least 5 mm. ?The label may peel off cylindrical objects if the object is bent after the label is affixed. Diameter > 3 mm Diameter > 3...