Notice CANON Speedlite 270EX II disponible gratuitement après inscription

Extrait de la notice

on manual of the camera or the Speedlite with a master function. 1Set the camera or Speedlite as the master unit. 2Set the 270EX II as the slave unit. Set the power switch of the 270EX II to <SLAVE>. 3Attach the 270EX II to the supplied mini stand and position the flash. Indoors, you can perform wireless flash shooting using the reflection of the surrounding walls without having to point the wireless sensor of the 270EX II toward the camera. Position the 270EX II while checking that it can fire. Wireless Flash Shooting 18 Transmission channel You can use the flash regardless of the transmission channel (1 to 4) on the master unit. Slave ID (firing group) The slave ID is set (fixed) to group A. This cannot be changed to group B or C. When the power switch of the 270EX II is set to <SLAVE>, the power of the flash turns off automatically if no operations are made within 60 or 10 minutes (p.16 C.Fn-10). If the master unit does not have a function for canceling the auto power off (p.16 C.Fn-11) on the 270EX II, set the power switch of the 270EX II to <OFF> and then to <SLAVE> again. Auto power off on the slave unit The supplied mini stand is for use only with the 270EX II. Use with another flash may cause the attached flash to fall.COPY19 The 270EXII can be used for remote control shooting with cameras compatible with Remote Controller RC-1, RC-5, or RC-6. When wireless flash shooting is enabled, remote control shooting is possible while changing easily the position of the 270EX II. Example of using the flash for wireless flash shooting Using the 270EX II for Remote Control Shooting During Wireless Flash Shooting "Point the 270EX II toward the camera and press the remote release button. #Point the 270EX II to the subject...