Notice DELONGHI DCH 2570 disponible gratuitement après inscription

Extrait de la notice

SSION. INSTALLATION The appliance can be used on any horizontal surface. Do not overload the electrical circuit. Avoid using the same socket for other appliances. OPERATION AND USE 1.Make sure the appliance is off before plugging into the mains 2. To turn the appliance on, the switch at the back must be in the I position. The appliance emits a beep. The “ON” light also comes on and remains lit while power to the appliance is on. 3. Press button Ato turn the appliance on. 4. The appliance starts up in LOWmode (minimum heat output). The display shows room tem- perature. 5. Press the MODE BUTTON(B) to switch to HIGHmode (maximum heat output). The display shows room temperature. 6.Press the MODE BUTTON(B) again to switch the appliance to AUTOmode. The display shows both room temperature and the temperature set point. To change the temperature set point, use the + and – buttons. 7. Press the MODE BUTTON(B) a fourth time to switch the appliance back to LOWmode. When the MODE button is pressed continuously, the appliance switches through the fol- lowing modes in sequence: LOWHIGH AUTO. 8. To turn the appliance off, press button A and place the switch on the back in the 0position. Adjusting the thermostat 1.Press the MODE BUTTON(B) until AUTOis displayed. 2. Use the +and –buttons to increase or reduce the temperature set point The thermostat will then keep room temperature at the selected level automatically. 3.When room temperature is 2°C above the set temperature, the appliance goes off. 4. When room temperature drops below the set temperature, the appliance comes on automa- tically. Frost prevention mode You can keep the room at a temperature of about 5°C to prevent freezing with minimum energy consumption. Press the MODE BUTTON(B) until AUTO...