Notice EPSON TM U230 disponible gratuitement après inscription

Extrait de la notice

hat fed paper does not accumulate. Otherwise a paper jam might occur. screw print head cover u230u.book Page 8 Thursday, December 25, 2003 1:48 PMTM-U230 User’s Manual 9 English The autocutter blade is not in its normal position. If you can see the blade in the autocutter slit, the blade is not in the normal position. This might be caused by a paper jam. ?Insert a screwdriver to the right side of the autocutter and turn the gear inside to move the blade to the normal position. See the illustration below. . blade insert a screwdriver u230u.book Page 9 Thursday, December 25, 2003 1:48 PM10 TM-U230 User’s Manual English DIP Switch Tables [bps: bits per second] Serial (DIP Switch 1) SWFunctionOnOff 1Data receive errorIgnoredPrints “?” 2Receive buffer capacity 1KB16KB 3HandshakingXON/XOFFDTR/DSR 4Word length7 bits8 bits 5Parity checkYesNo 6Parity selectionEvenOdd 7Transmission speed 4800 bps9600 bps 8 BUSY conditionReceive buffer full Receive buffer full or Offline Serial (DIP Switch 2) SWFunctionOnOff 1Selects number of characters per line (cpl) 7 × 9 font/ 9 × 9 font 42/3540/33 2For internal use only (autocutter) (Do not change) EnabledDisabled 3Pin 6 reset signalUsedNot used 4Pin 25 reset signalUsedNot used 5PAPER OUT LED blinking pattern BlinksLights on 6For internal use only (flash memory rewriting) (Do not change) Enabled Disabled 7For internal use only (interface synchronization) (Do not change) AsynchronousSynchronous with clock 8Internal buzzerDisabledEnabled Parallel (DIP Switch 1) SWFunctionOnOff 1Auto line feedEnabledDisabled 2Receive buffer capacity 1KB16KB 3~7Undefined-- 8BUSY conditionReceive buffer full Receive buffer full or Offline Parallel (DIP...