Notice FAGOR 7CFG61X disponible gratuitement après inscription

Extrait de la notice

.Acrylic It can be washed at more or less frequent intervals depending on how often the hood is used. In any case, it should be washed every thirty days of hood operation. To do so, wash the filter by hand In warm soapy water (do not wring the filter, press it in a cloth to dry). 2.Special paper (not washable) with red diagonal lines on the top of the sheet. Change the filter when the diagonal lines are visible from below through the grille holes. 3.Aluminium layers The filter should be washed every 10-15 days (in normal operating conditions). Dip the filter into a degreaser solution or put it in the dish washer. Make sure not to damage the filterwhich is made of several layers of thin alloy, by hitting orcrushing it. Active carbon odour filter The exhausted air passes through the active carbon filter and is cleaned. This filter cannot be washed and must be replaced depending on how often the hood is used (about twice a year). Changing the grease and odour filters 1.Press the 2 grips one towards the other (Fig. 4/1) and unhook the grille. For the models which are fitted with an aluminium grease filter-box, remove the aluminium filter as in point 2 andpull the 2 latches (Fig. 8/1) inwards. 2.Take off the filter retainings (Fig. 5/1) and after this the grease filter. For the models which are fitted with an aluminium greasefilter-box it is necessary to push the handle inwards and pulldown the filter-box (Fig. 7/1). 3.In order to change the carbon filter it is sufficient turn counter clockwise (Fig. 5/2). Clean the outside of the hood with a sponge soaked with liquid neutral detergent or with a cloth soaked with denatured ethyl alcohol. Do not use products containing abrasives. If the lamps fail to light when operating the switch, make sur...