Notice JANOME 6600P disponible gratuitement après inscription

Extrait de la notice

Control 27.Accessory Box 28.Knee Lifter 29.Dual Feed Foot AD5 1 2 3 4 76 5 1 5 6 42 3 Connecting the Power Supply GETTING READY TO SEW 1Power Switch 2Machine Plug 3Machine Socket 4Power Supply Cord 5Power Supply Plug 6Wall Outlet NOTE: Make sure to use the power supply cord that comes with the machine. To use foot control Turn off the power switch, insert the foot control plug and machine plug into the machine, then the power supply plug into the wall outlet in this order. Turn on the power switch. 1Power Switch 2Machine Plug 3Machine Socket 4Foot Control Plug 5Power Supply Plug 6Wall Outlet 7Foot Control socket CAUTION Always turn the power switch off and unplug the sewing machine from the electrical outlet when the machine is not in use. To use start/stop button Turn off the power switch, then insert the machine plug into the machine and the power supply plug into the wall outlet. Turn on the power switch. z x z x6 Controlling Sewing Speed Speed control slider Sewing speed can be varied according to your sewing needs with the speed control slider. qTo increase sewing speed, slide it to the right. wTo decrease sewing speed, slide it to the left. Foot control Sewing speed is varied by the foot control. The harder you press down on the foot control, the faster the machine runs. The machine runs at the maximum speed set by the speed control slider when the foot control is fully depressed. Operating Instructions: The symbol “O” on a switch indicates the "off" position of a switch. For appliances with a polarized plug (one blade wider than the other): To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If it does not fit fully in the outlet, reverse th...