er. There is always arisk of suffocationif children play with plastic bags! ¦The fastening material required for each assembly step is shown in the diagram inset. Use the fastening material exactly as instructed. The required tools are supplied with the equipment. ¦Bolt all the parts together loosely at ?rst, and check that they have been assembled correctly. Tighten the locknuts by hand until resis- tance is felt,then use spanner to ?nally tighten nuts completely against resistance (locking device).Then check that all screw con- nections have been tightened ?rmly. Attention:once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced. ¦To pull off the pedal arms remove cap and screw (A). Grip the pedal arm tightly, and screw in an M12 bolt (not supplied) into the thread (B). After a few turns you may take off the pedal arm (C). ¦For technical reasons, we reserve the right to carry out prelim- inary assembly work (e.g. addition of tubing plugs). ¦Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary. List of spare parts When ordering spare parts, always state the full article number, spare partnumber, the quantity required and the S/N of the product. Example order:Art. no. 07938-200 / spare-part no. 33100003/ 2 pieces /S/N no...... Important:spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.) is required, this should be clearly stated on the order by adding the words „with fastening material“. KETTLER (GB) Ltd. · Merse Road · North Moons Moat · Redditch, Worcestershire B98 9HL · Great Britain KETTLER International Inc. · P. B. 2747 · Virginia Beach · VA 23450 -27...