Notice LVI Milo H disponible gratuitement après inscription

Extrait de la notice

space for the thermostat. A2 The vertical radiators (H => 1500) are supplied with safety chains, which are ?t- ted between the radiator brackets and the wall brackets. Radiators with a height of 1,500 mm, or higher, are provided with brackets in the middle. The radiators are mounted and ?tted by lifting up all the brackets to the mounting position (this is simpli?ed by using the enclosed hook) and then pressing the radiator to the brackets, whereby the spring locks click into place. Check that all the brack- ets have hooked on. *** The wall outlet box does not ?t between the wall brackets for this model. It is to be placed on the wall above the thermostat instead. Instead of 120 mm from the ?oor (as in the drawing) it has to be placed at 335 mm from the ?oor in this case. B For vertical SET-radiators, towel bars (HDH) are available as a compliment. One HDH 300 respectively HDH 400 (corresponding to the radiator´s width) consists of two bars with a ?xed distance of 27 cm. The distance "h" is proposed to be about 10 cm. D When the radiator is delivered with a terminal box and a 5-pole plug, it should be connected by a suitably quali?ed electrician. The terminal box is best posi- tioned behind the radiator. The terminal box has break-off openings for a con- duit box, wiring tubes and an external cable. Please refer to the wiring diagram picture D for the connection of the radiator. The wiring diagram can also be seen on lid of the terminal box. SlAve connection The SET radiator can control another radiator in what is known as a master/slave radiator installation. The total output that the master radiator can regulate is 2300 W. Slave radiators are connected as per the wiring diagram on the terminal box lid. The mast...