Notice MSI P7N SLI Platinum

Notice MSI P7N SLI Platinum disponible gratuitement après inscription

Accédez à la notice du MSI P7N SLI Platinum en adhérant à la communauté.

Notice d’utilisation de votre MSI P7N SLI Platinum. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre P7N SLI Platinum.

Notices - manuels - modes d'emploi disponibles pour MSI P7N SLI Platinum après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

CPU socket called Socket 775 for easy CPU installation. If you do not have the CPU cooler, consult your dealer before turning on the computer. For the latest information about CPU, please visit func=cpuform 1 Central Processing Unit: CPU Important Overheating Overheating will seriously damage the CPU and system. Always make sure the cooling fan can work properly to protect the CPU from overheating. Make sure that you apply an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to enhance heat dissipation. Replacing the CPU While replacing the CPU, always turn off the ATX power supply or unplug the power supply’s power cord from the grounded outlet first to ensure the safety of CPU. Overclocking This mainboard is designed to support overclocking. However, please make sure your components are able to tolerate such abnormal setting, while doing overclocking. Any attempt to operate beyond product specifications is not recommended. We do not guarantee the damages or risks caused by inad- equate operation or beyond product specifications.En-6 MS-7380 Mainboard CPU & Cooler Installation Procedures for Socket 775 1. The CPU socket has a plastic cap on it to protect the contact from damage. Before you have installed the CPU, always cover it to pro- tect the socket pin. 2. Remove the cap from lever hinge side. 3. The pins of socket reveal. 4. Open the load lever. 5. Lift the load lever up and open the load plate. 6. After confirming the CPU direction for correct mating, put down the CPU in the socket housing frame. Be sure to grasp on the edge of the CPU base. Note that the alignment keys are matched. 7. Visually inspect if the CPU is seated well into the socket. If not, take...

En cours...