Notice OLYMPUS C-5060 Wide Zoom disponible gratuitement après inscription

Extrait de la notice

will be ejected a short way to enable you to pull it out. Switching cards The card currently in use is displayed on the control panel or monitor. Choose the card you want to record the picture on before taking the picture. The factory default setting is the xD-Picture Card. If only one card is inserted, that card is automatically selected. Card selection can also be made in Playback mode. Releasing your finger quickly after pushing the card all the way in may cause it to eject forcefully out of the slot. Note basic_e_x191_6.fm Page 15 Thursday, August 28, 2003 12:44 PM16En En TURNING THE POWER ON/OFF Power on 1Remove the lens cap. 2Pull the monitor out and rotate it. •Some of the camera’s functions cannot be operated if the monitor is left closed. Be sure to open the monitor before shooting or playing back images. •You can change the angle of the monitor. 3Turn the mode dial until the mode you want to use is aligned with the red line. 4Turn the power switch so that ON is aligned with the ( mark. •When the mode dial is set to a mode other than q, the camera turns on in the shooting mode. The monitor turns on and the lens extends. •When the mode dial is set to q, the camera turns on in the playback mode and the monitor turns on. •You can also change the mode with the camera turned on. Mode dial Power switch basic_e_x191_6.fm Page 16 Thursday, August 28, 2003 12:44 PMEn17 En Power off 1To turn the power off, turn the power switch so that OFF is aligned with the ( mark. •The monitor turns off, the lens retracts and the power turns off. 2Turn the monitor towards the camera and close it. •To protect the monitor, you are recommended to keep it closed when the camera is not in use. SELECTING A LANGUAGE...