Notice PEG PEREGO Triplette Sw disponible gratuitement après inscription

Extrait de la notice

cessary to push the locking lever down (fig. B) and at the same time push the hub onto the pin (fig. C). Check that the wheels are properly attached by pulling them in opposite directions. 4 To fit the rear wheels, repeat the action carried out for the front wheels (sequence B and C). The rear wheels can be identified by the black teeth, as shown in figure A. Check that the wheels are properly attached by pulling them in opposite directions. 5 BRAKE: to activate the brake on the chassis, push down with your foot on the brake bar located on the rear wheels, as shown by the arrows in the figure. 6 OPENING: activate the brake on the folded chassis. Unfasten the tab, as in the figure. 7 Lift the handlebar in the direction of the arrow (Fig. A). Press the handlebar downwards until the final click (Fig. B). 8 Check that the opening is correct, as in the figure. 9 BASKET: fasten the basket on the chassis base, as shown in the figure, at six specific points. Attach the four buttons, to the front and rear, as in figures A and B; then attach the two Velcro strips to the chassis tube, as in figure C. 10 STEERING WHEEL: to guarantee good grip, the steering wheel may adopt four different positions. To adjust them, press the button as in the figure. 11 STEERABLE WHEELS: the practical steering wheel allows you to steer the front wheels. To steer, move the lever on the steering wheel to the right, as in figure A. To fix the wheels, move the lever to the left, as in figure B. 12 WHEEL REMOVAL: press down on the lever at the centre of the wheel, as shown by the arrow in figure A, and simultaneously pull the wheel towards you (Fig. B). 13 FOLDING: activate the brake and release the seats. To fold the chassis, lift the lever on t...