Notice PEG PEREGO Walk'n Play Jumper disponible gratuitement après inscription

Extrait de la notice

o the slots, pushing downwards as in the figure. 2 TO FIT THE BACKREST: remove the rigid backrest from the lower part of the Jumper (fig_a). Turn the Jumper upside down and insert the backrest into its housing (fig_b). 3 TO OPEN THE JUMPER: lift up the jumper as in the figure. 4 TO ATTACH THE SACK: position the padded sack as in the figure, making the sack clips meet the holes in the bodywork (fig_a). Press along the entire seat-edge where every clip is positioned (fig_b). Arrange the fabric by pushing it inside (fig_c). Turn the Jumper upside down to check that the sack is correctly fitted to the bodywork. Use the tool provided, as in the figure (fig_d). 5 ELECTRONIC PLAY CENTRE: the batteries are NOT included in the package. To activate the sound module, 2 “penlight” AA 1.5 volt batteries are necessary. Unscrew the cover of the battery compartment with a screwdriver and insert the batteries. Afterwards, screw the compartment cover back on again (fig_a). Position the play centre to one side and press from above to attach it to the tray of the Jumper (fig_b). 6 HOW TO USE THE ELECTRONIC PLAY CENTRE: the sound module has 2 volume regulations and different melodies for each game. To switch on the sound module and to adjust the volume, move the key, indicated by arrow 1. To change the melodies for the various games: 2: move the lever as in the figure to make the music play. 3: turn the key; 2 different melodies are available. 4: press the coloured buttons; 4 melodies are available, one for each button. 5: turn the circle to make the music play. 6: press the button; 2 different melodies are available. 7 JUMPER: to make the Jumper springy, move the grey lever situated on the back of the upper ring to the right. To make it rigid, move the le...