Notice PHILIPS GC8080/08 disponible gratuitement après inscription

Extrait de la notice

re Centre in your country (you will find its phone number in the worldwide guarantee leaflet).If there is no Customer Care Centre in your country,turn to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV. ENGLISH1516 Solution Check the mains cord,the plug and the wall socket. Set the on/off switch to 'on'. Press any button on the iron to deactivate the Iron-off function.The soleplate will then start heating up again. This phenomenon is perfectly normal and will cease after a short while. Fill the water tank (see 'Preparing for use',section 'Filling the detachable water tank'). Wait until the pilot light goes out. Set the temperature to 2or higher. Attach the water tank to the steam tank properly (you will hear a click). Set the iron to a lower temperature, e.g.2,to check if the iron is actually producing steam. Clean the soleplate with a damp cloth. Contact an authorised Philips service centre. This is normal. Unplug the iron immediately and contact an authorised Philips service centre. Rinse the steam tank.See chapter 'Cleaning and maintenance'. Possible cause(s) There is a connection problem. The steam tank has not been switched on. The Iron-off function has switched the soleplate off. Some parts of the appliance have been lightly greased in the factory and may initially give off some smoke when heated. There is not enough water in the water tank. The steam tank pilot light is still on. The selected ironing temperature is too low for steam ironing. The water tank has not been properly attached to the steam tank. When the iron has been set to a very high temperature,the steam produced is dry and hardly visible.It will be even less visible when the ambien...