Notice QUINTEZZ Laser Detector disponible gratuitement après inscription

Extrait de la notice

tched on, the DRIVE CONTROL will perform an automaic self test. If you hear the audio text ‘FASTEN YOUR SEAT BELT, BE CAREFUL’, the test has been properly performed and the display will show: > > 3.2 LOOKING FOR SATELLITES Once the automaic test has been performed, the DRIVE CONTROL will try to contact the GPS satellites. The display will show ‘SRCH’ (Search).-GB-4- If the Radar / Laser Detector is installed, it will start working immediately. The GPS alarm will only be working a?er the connecion to the satellites is established. ATTENTION: The ?rst ime the DRIVE CONTROL is switched ON, it can take about 15 minutes to catch the satellites. Obstacles in the direct environment and the moving of the car can extend the duraion of the ?rst connecion to the satellites. The DRIVE CONTROL will stay connected with 4 to 12 satellites. If the connecion is shortly cut (for example when passing through ?yunders and tunnels) the display will go to connecion mode, showing 3.3 DRIVING MODE The DRIVE CONTROL is the perfect soluion to prevent you from speeding a few kilometers by accident. When the connecion with the satellites is OK, you will see the following display, showing the ime. When the car is moving, the real speed and heading is shown. SETTINGS OF THE DRIVE CONTROL 4.1 VOLUME SETTING You can set the volume by the VOL – or VOL + key. 4.2 SETTING MENU The menu buton is located at the top of the DRIVE CONTROL and indicated with “SETTING”. By pressing this buton, you will access the seing menu that contains the following choices: 1. Rlogic: 0 / 1 / 2 / 3 / 4 / CITY (visible when radar is on) 2. X/Ku: ON/OFF 3. K: ON/OFF 4. Ka: ON/OFF 5. Ka N: ON/OFF 6. MAX: Maximum speed for overspeed warning 7. Default / Details / Comfort: The s...