Notice QUINTEZZ XT-7000 Z-2 disponible gratuitement après inscription

Extrait de la notice

ing on), we advise you to complete following checks: •Is the power cord properly plugged in at both ends? •Is the fuse OK? •Is the cigar lighter socket clean and free from corrosion? •Is the ON/OFF key (PWR) used to switch the unit ON? 95:41 ,5002.21.22dmp.n_BG_0007zzetniuQ_m6GB-7 FUSE REPLACEMENT INSTRUCTIONS Do not use any tools to change the fuse. •Press the top of the fuse holder down and rotate it anti-clockwise approx. 30°. Lift the top straight up. •Remove the fuse and replace if required by one of the same rating. The silver tip contains a spring which may fly off when disassembling. The fuse should be inserted before the spring. •Place the top of the fuse-holder back on the body. Press down and rotate the top of the fuse holder clockwise approx. 30°. NOTE : •Failing to press the top of the fuse holder down prior to rotating it will damage the fuse holder. Use of pliers to rotate the top may also cause damage. •Illustration indicates direction that the fuse holder top must be rotated to reassemble. m_Quintezz7000_GB_n.pmd22.12.2005, 14:597INHOUD INLEIDING................................................................................................................2 CONFIGURATIE VAN DE QUINTEZZ XT-7000.........................................................2 INSTALLATIE...........................................................................................................2 A.ALGEMENE RICHTLIJNEN....................................................................................2 B.BEVESTIGINGSMOGELIJKHEDEN.......................................................................3 C.VOEDING...............................................................................................................3 WERKING VAN DE RADAR & LASER.....