e setting is canceled. Searching by skip items — Jump mode When many items are in a category, you can search the desired item quickly. 1Press +> in Quick-BrowZer mode. The following display appears. ACurrent item number BTotal item number in the current layer Then the item name will appear. 2Rotate the control dial to select the desired item, or one near the desired item. It skips in steps of 10% of the total item number. 3Press the select button. The display returns to the Quick-BrowZer mode and the selected item appears. 4Rotate the control dial to select the desired item and press it. Playback starts if the selected item is a track. To cancel Jump mode Press (BACK) or –.. (BROWSE) Control dial/ select button (BACK)+>/–.11 Searching a track by listening to track passages — ZAPPIN™ While playing back short track passages in a USB device in sequence, you can search for a track you want to listen to. ZAPPIN mode is suitable for searching for a track in shuffle or shuffle repeat mode. 1Press (ZAP/SHUF) during playback. After “ZAPPIN” appears in the display, playback starts from a passage of the next track. The passage is played for the set time, then a click sounds and the next passage starts. 2Press the select button or (ZAP/SHUF) when a track you want to listen is played back. The track that you select returns to normal play mode from the beginning. To search a track by ZAPPIN mode again, repeat steps 1 and 2. Tips •You can select the playback time from about 6 seconds/15 seconds/30 seconds (page19). You cannot select the passage of the track to playback. •Press +>/–. in ZAPPIN mode to skip a track. •Pressing (BACK) also confirms a track to playback. Radio Storing and receiving stations Cau...