Notice SONY GIGAVAULT disponible gratuitement après inscription

Extrait de la notice

to use the unit with the default Windows XP driver but we strongly recommend that you install the device driver on the CD-ROM supplied with the unit. Failure to do so may cause the unit to malfunction. 1Insert the supplied CD-ROM into the CD-ROM drive of your computer. Note If you are using an external CD-ROM drive connected to the USB port of your computer and this is the only available USB port, copy the contents of the CD-ROM to the C:\Gigavault folder on the hard disk of your computer, remove the CD-ROM from the drive, and then disconnect the CD-ROM drive. (You must create the C:\Gigavault folder beforehand.) 2Using the USB cable, connect the unit to your computer. Your operating system detects the unit and installs the default device driver. Wait until the system informs you that the installation is complete. Windows XP opens a selection dialog box at this point. Click [Cancel] to close it. Note Connect the unit directly to a USB port of your computer when you install the device driver. Avoid connecting the unit to USB hubs or with extension cables. 3Access the CD-ROM with Windows Explorer or other such application, and then double-click Setup.exe. (If you copied the contents of the CD- ROM to the C:\Gigavault folder on the hard disk of your computer as indicated in step 1, double-click Setup.exe found there.) An installation wizard starts.9 4Follow the instructions on the screen to complete the installation of the device driver. If a message appears indicating that the provided driver has not passed Windows Logo testing, click [Continue Anyway] to continue. Note A device driver is necessary for each different unit that you connect to a computer. Follow the procedure outlined above to install device drivers for the second unit onward. Wi...