Notice SONY MDS-W1 disponible gratuitement après inscription

Extrait de la notice

his deck is displayed on a 24-hour clock. 1Press 1/u. The STANDBY indicator starts flashing. 2While the deck is stopped, press MENU/NO twice to display SET UP menu. 3Turn AMS to select “CLOCK”, then press AMS. The day indication in the display starts flashing. 4Turn AMS to enter the current day, then press AMS. The day indication stops flashing, and the month indication starts flashing. 5Repeat Step 4 to enter the month, year, hour, and minute. “” appears in the display and the clock is set. zFor precise time and date stamping of recordings Reset the time at least once a week. Note If the AC power cord is disconnected for a long time, the memorized clock settings will disappear and “0:00” will flash in the display the next time you plug in and turn on the deck. If this happens, reset the clock. Displaying the current date and time Z You can display the current date and time any time even when the deck is in standby status. Press DATE PRESENT. When you press DATE PRESENT, the date and time appear for approximately two seconds and then the display returns to the original display. zThe deck shows the clock display when the deck is in standby status. Changing the date and/or time 1Do Steps 1 to 3 in “Setting the Clock” on this page. 2Press AMS (or 0/)) repeatedly until the item you want to change flashes. 3Turn AMS to change the contents of the selected item. 4To complete the setting, press AMS. The clock starts working again. Deactivating the demonstration mode If the MD deck does not contain a disc, demonstration mode is activated automatically after about ten minutes. To deactivate the demonstration mode, press any button on the MD deck or the remote. To turn off the demonstration mode, press CLEAR on both decks A and B at t...