Notice SONY MZ-R55 disponible gratuitement après inscription

Extrait de la notice

nput. Difference between digital and analog inputs zVarious ways of recording Connectable source Usable cord Signal from the source Recorded track numbers Recorded sound level Equipment with an analog (line) output jack Line cable (with 2 phono plugs or a stereo-mini plug) Analog Even when a digital source (such as a CD) is connected, the signal sent to the recorder is analog. Marked automatically •after more than 2 seconds of blank or low-level segment. •when the recorder is paused while recording. You can erase unnecessary marks after recording (“Erasing a track mark”, page 22). Adjusted automatically. Can also be adjusted manually (“Adjusting the recording level manually”, page 13). Equipment with an optical digital output jack Digital cable (with an optical or an optical-mini plug) Digital Marked (copied) automatically •at the same positions as the source. •when the recorder is paused while recording. You can erase unnecessary marks after recording (“Erasing a track mark”, page 22). Same as the source Note Track marks may be copied incorrectly : •when you record from some CD players or multi disc players using digital input. •when the source is in shuffle or program play mode while recording using digital input. In this case, play the source in normal play mode. •when recording BS or CS programs through digital input. DifferenceInputDigital inputAnalog (line) input11-GB To start/stop recording in sync with the source player (Synchro-recording) You can easily make digital recordings of a digital source on an MD. Before synchro-recording, make connections to the digital source with a digital cable, and insert a recordable MD. 1Slide SYNCHRO REC to ON. “SYNC” appears in the display. 2Press and slide REC t...