Notice SONY SCD-CE595 disponible gratuitement après inscription

Extrait de la notice

nput connector on an MD deck, etc.Playing Discs 9GB The operations for normal play and the basic operations during play are explained below. 1Turn on the amplifier. Turn down the volume level to the lowest. 2Select the player position using the input selector on the amplifier. 3Press POWER on the player to turn on the player. 4Press A OPEN/CLOSE on the player to open the disc tray, and place a disc on the tray. 5To place other discs, press DISC SKIP (or DISC SKIP +/– on the remote) repeatedly and place the discs in the order you want to play. Each time you press the button, the disc tray turns and you can place the discs in the empty disc compartments. The player plays the disc in front of you first. 6Press PLAY MODE (or CONTINUE on the remote) repeatedly to select ALL DISCS or 1DISC Continuous Play mode. Each time you press CONTINUE on the remote, “ALL DISCS” or “1 DISC” appears in the display. 7Press H. Playback starts from the first track. If you want to start playing from a specific track, turn l AMS L (or press ./> on the remote repeatedly) to select the track number before pressing H. 8Adjust the volume on the amplifier. Basic operations during play Note During playback, increase the volume level gradually starting from the lowest level. The output from this player may contain band width that is out of the normal listening range. This may cause damage to the speakers or ears. Selecting the playback layer When playing a hybrid disc with an SA-CD layer and a CD layer (page5), you can select the layer you want to listen to. Also, since both layers are on one side, it is not necessary to turn the disc over. Press SA-CD/CD to select the desired playback layer. To select the default playba...