aker may be short-circuited. If this happens, check the speaker connection again. Active woofer Note Do not connect any other component. If you have an additional front speaker system Connect them to the SPEAKERS FRONT B terminals. If your TV monitor uses separate speakers You can connect one of them to the SPEAKERS CENTER terminals for use with Dolby Pro Logic Surround sound (see page 19). FRONT SPEAKERS B R+– A B FRONT SPEAKERS R+– A WOOFER AUDIO OUT INPUT ReceiverActive Woofer9GB Getting Started Selecting the speaker system To drive the speakers, select the speaker system as follows: to a wall outlet/ SWITCHED AC OUTLET AC Hookups Connecting the mains lead Connect the mains lead from this receiver and from your audio/video components to a wall outlet. If you connect other audio components to the SWITCHED AC OUTLET on the receiver, the receiver can supply power to the connected components so you can turn on/off the whole system when you turn on/ off the receiver. Caution Make sure that the power consumption of the component connected to the receiver’s AC outlet does not exceed 100 watts. Do not connect high-wattage electrical home appliances such as electric irons, fans, or TVs to this outlet. Where do I go next? Before you use thereceiver, go to the next section to make sure that all the controls are set to the appropriate positions. To drive Speaker system A (connected to the SPEAKERS FRONT A terminals) Speaker system B (connected to the SPEAKERS FRONT B terminals) Both speaker systems A and B (series connection) Notes •If you want to enjoy the surround sound, be sure to connect the front speakers to the SPEAKERS FRONT A terminals. •No sound is heard when you press SPEAKERS A + B without connecting spea...