Notice ION Audio iPTUSB

« t Guide with step-by-step instructions on software installation and operation. Audacity is intended for the advanced user. This application allows for advanced audio editing and processing, such as normalization, noise removal, and automatic track separation. The Audacity Software Guide can be found on the included CDs – please refer to this guide as you are working with Audacity. To install the software: simply insert the included CD into your computer and follow the on-screen instructions. After you finish converting your vinyl, you can then burn to CD or load onto portable media devices. CONNECTION DIAGRAM NORMAL FILTERS FLANGER AUTOPAN LR AUTOCUT FILTERED LOPASS VARI-CUT RATE RATE DJ HEADPHONE AUDIO RECORDER POWER MIXER 1. Make sure all items listed on the front of this guide are included in the box. 2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT. 3. Study this setup diagram. Note: This turntable can be used as a standalone unit, as well as with the items listed in the quick setup diagram. 4. Make sure all devices are turned off and all faders and gain knobs are set to “zero” 5. Connect all stereo input sources as indicated in the diagram. 6. Connect the stereo output devices to power amplifier(s), tape decks, and/or other audio sources. 7. Plug all devices into power. 8. Switch everything on in the following order. • Turntable • Mixer (not included) • last, any amplifiers or output devices (not included) 9. When turning off, always reverse this operation by, • turning off amplifiers (not included) • mixer (not included) • Turntable 10. Go to http://www.ion-audio.com for product registration. More information about this product may be found at http://www.ion-audio.com PRODUCT FEATURES 1. Platter: Place your record on the platter. 2. Control Panel: Please see the alternate detailed section on the control panel features. 3. On Board Speaker: Use this speaker to listen to the audio. 4. Tone Arm Clip: Use this clip to secure your tonearm when storing and transporting the unit. 5. Tonearm: This unit comes with a ready to use pre-balanced tonearm and cartridge. The cartridge is user replaceable with parts from your distributor located in the warranty guide. The platter starts spinning once the tonearm is lifted over the record. 6. 45 Adapter: Use this adapter with 45 rpm records. 7. Dust Cover: This cover protects the turntable from dust and abuse while not in use or while in transport. 8. Dust Cover Latch: This latch holds the dustcover securely in place, and can easily be opened by sliding it to the left. 9. Carry Handle: Use this handle easily remove the unit from record crates and bags, as well as carrying it in transport. 10. Battery Cover: This holds the batteries securely in place during use and transport. It easily slides open and closed as indicated on the cover itself. NOTE: This unit uses 6 “D” cell batteries (not included). They should be installed in the proper direction indicated OUTPUT PANEL FEATURES 1. Power Switch: Use this switch to turn the power on and off. 2. AC In: This turntable is designed to work with either batteries or the power supply cord that comes with it. While the power is switched off, plug the power supply int... »