Notice HOOVER TF 2011

« can cause a small build up of static electricity. Any static discharge is not hazardous to health. AFTER USE: Switch the cleaner off and remove the plug from the electricity supply. Always switch off and remove the plug before cleaning the appliance or attempting any maintenance task. Safety with children, elderly or the in?rm: Do not let children play with the appliance or its controls. Please super- vise the use of the appliance by older children, the elderly or the in?rm. HOOVER SERVICE: To ensure the continued safe and ef?cient operation of this appliance we recommend that any servicing or repairs are only carried out by an authorised Hoover service engineer. iT iS imPorTAnT ThAT yoU Do noT: Position the cleaner above you when cleaning the stairs.• Use your cleaner out of doors or on any wet surface or for wet pick up.• Pick up hard or sharp objects, matches, hot ashes, cigarette ends or other similar items.• Spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours as this may cause risk • of fire / explosion. run over the supply cord when using your cleaner or remove the plug by pulling on the supply cord.• Stand on or wrap the power cord around arms or legs when using the cleaner.• Use the appliance to clean people or animals.• Continue to use your cleaner if it appears to be faulty. If the supply cord is damaged stop using the cleaner • IMMEDIATELY. To avoid a safety hazard, an authorised Hoover service engineer must replace the supply cord. • geTTing To Know yoUr cleAner Main CleanerA. On/Off ButtonB. cord rewind ButtonC. Power controlD. Bag check indicatorE. Bag Door Release ButtonF. Bag DoorG. HandleH. Standard Tube*I. Telescopic Tube*J. Telescopic Tube Release*K. HoseL. Carpet and Floor nozzleM. Carpet Care Control SelectorN. 2 in 1 ToolO. Furniture NozzleP. easy Parquet nozzle*Q. Pet Hair Remover Mini Turbo Nozzle*R. Grand Turbo Nozzle*S. (*Certain models only) ASSEMBLING YOUR CLEANER remove all components from the packaging. connect the hose to the cleaner main body, ensuring it clips and locks into position. To release: simply press 1. the two buttons on the hose end and pull [2]. Connect the tube upper end to the handle 2. [3], if using a standard tube, assemble the lower tube to the upper tube. Store the 2in1 tool and furniture nozzle onto the tool post. Attach the tool post to the tube. [4]. connect the tube lower end to the carpet and ?oor nozzle3. [5]. USING YOUR CLEANER extract power cord and plug it into the power supply. Do not pull the cord beyond the red marker 1. [6]. Adjust the length of the telescopic tube* by moving the telescopic release button up and raise or lower the 2. handle to the most comfortable cleaning position [7]. (*certain models only) Carpet & Floor Nozzle. Press the pedal on the nozzle 3. [8] to select the ideal cleaning mode for the ?oor type. Hard Floor: The brushes are lowered to protect the ?oor Carpet: with lifted brushes for the deepest clean Switch the cleaner on by pressing the on/off Button on the cleaner main body 4. [9]. Adjust the power control regulator to the desired level.5. [10]. Switch off at the end of use by pressing the on/off Button. Unplug and press the cord rewind button to wind 6. the power cord back into the cleaner [11]. Parking and Storage - The tube can be parked for temporary storage 7. [12A] while in use, or in the storage positio... »