Notice MOTOROLA Motorokr S305

« battery before using it. Plug the charger into the charging port on your headphones (as shown below) and a wall outlet. The indicator light is red while the battery is charging. When the battery is fully charged, the indicator light turnsgreen. Note: Your battery is designed to last the life of your headphones. It should only be removed by a recycling facility. Any attempt to remove or replace your battery will damage your headphones.connect wirelessly 5 connect wirelesslypair & connect Once charged, get your headphones paired and connected to your Bluetooth phone and/or music player. 1Turn off any Bluetooth devices previously paired (linked) with your headphones. 2Turn on the Bluetooth feature on your phone or music player. 3Turn on your headphones by pressing and holding the Ö button until the indicator light turns green. The indicator light flashes in red and green to indicate the headphones are in discoverable mode. 4Set your phone or music player to search for Bluetooth devices. 5Select Motorola S305 from the search results on your phone or music player. 6Select OK or Yes to pair your headphones with your phone or music player. 7If prompted, enter 0000 for the passkey.connect wirelessly 6 The indicator light rapidly flashes green every 3 seconds when complete. For connect status: reconnect After initially pairing and connecting your phone and/or music player and headphones, you don’t need to do itagain. For daily use, make sure your headphones are turned ON, and your phone and/or music player’s Bluetooth feature is ON. Your headphones and phone/music player will connect automatically! Number of FlashesIndicates 1connected for calls and music 2connected for music only 3connected for calls only 4not connected—repeat pair & connect steps on page 5connect wirelessly 7 test your connections To confirm connection to your phone and/or music player: make handsfree calls 1Place the headphones over your ears (see “wear your headphones” on page8 for help). 2Dial the number you want to call and press CALL/ SEND key on your phone. If your phone and headphones are successfully connected, you hear ringing on your headphones. play music 1Place the headphones over your ears (see “wear your headphones” on page8 for help). 2Play music on your phone or music player. If your music source and headphones are successfully connected, you hear music on your headphones.wear your headphones 8 wear your headphonesUse both hands to gently rotate the headphones over your head, then place the earhooks and speakers over your ears for a snug fit as shown. Once in place, the back of your headphones “float” over your neck.wear your headphones 9 If your headphones become flattened or bent (such as when stored in a backpack), twist the speakers in the direction as shown to restore to original shape.turn it on & off 10 turn it on & offPress and hold the Ö button until the indicator light turns green and you hear a tone sequence. Note: Your headphones will not turn on while charging. Note: If your headphones are idle for 5 minutes, they automatically turn off to conserve battery charge.control your tunes 11 control your tunesPlayback controls on your headphones can be used when listening to music from a Bluetooth-enabled music player that also provides remote control capabilities (AVRCP). If remote music control is not supported by your music p... »