Notice TOSHIBA RAS-10SKV2-E

« tact separation of at least 3 mm in all poles must be incorporated in the ? xed wiring. WARNING • Do not expose your body directly to cool air for a long time. • Do not insert your ? nger or any article into the air inlet/outlet. • When an abnormality (burning smell, etc.) occurs, stop the air conditioner and disconnect the power supply or turn off the breaker. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. • Children should be supervised to ensure that they do not play with the appliance. CAUTION • Do not wash the unit with water. It may cause an electric shock. • Do not use this air conditioner for other purposes such as preserving food, breeding animal, etc. • Do not step or put anything on the indoor/outdoor unit. It may cause an injury or damage the unit. • Do not touch aluminium ? n because it may cause an injury. • Before cleaning the unit, turn off the main switch or the circuit breaker. • When the unit won’t be used for a long time, turn off the main switch or the circuit breaker. • It is recommended that maintenance be performed by a specialist when the unit has been operated for a long time. PRECAUTIONS FOR SAFETY INDOOR UNIT DISPLAY 1 Hi POWER (Green) 2 FILTER (Orange) 3 PRE.DEF (DE-FROST) (Orange) 4 TIMER (Yellow) 5 OPERATION (Green) 6 RESET button 1 Hi POWERFILTERPRE.DEFTIMEROPERATION RESET123 45 6 PREPARATION BEFORE USE2 Preparing Filters 1. Open the air inlet grille and remove the air ? lters. 2. Attach the ? lters. (see detail in the accessory sheet). Loading Batteries 1. Remove the battery cover. 2. Insert 2 new batteries (AAA type) following the (+) and (–) positions. Clock Setup 1. Push CLOCK by tip of the pencil. 2. Press ON or OFF: adjust the time. 3. Press SET : Set the time. Remote Control Reset 1. Remove the battery. 2. Press . 3. Insert the battery. AIRFLOW DIRECTION3 Note: • Do not move the louver manually by others. • The louver may automation positioning by come operation mode. ONE-TOUCH5 Press the “ONE-TOUCH” button for fully automated operation that is customised to the typical consumer preferences in your region of the world. The customised settings control temperature air ? ow strength, air ? ow direction and other settings to provide you alternate contact with “ONE- TOUCH” of the button. If you prefer other settings you can select from the many other operating functions of your Toshiba unit. Press ONE-TOUCH : Start the operation. AUTOMATIC OPERATION6 To automatically select cooling, heating, or fan only operation 1. Press MODE : Select A. 2. Press TEMP : Set the desired temperature. COOLING / HEATING / FAN ONLY OPERATION7 1. Press MODE : Select Cool , Heat , or Fan only . 2. Press TEMP : Set the desired temperature. Cooling: Min. 17oC, Heating: Max. 30oC, Fan Only: No temperature indication 3. Press FAN : Select AUTO, LOW , LOW+ , MED , MED+ , or HIGH . DRY OPERATION (COOLING ONLY)8 For dehumidi? cation, a moderate cooling performance is controlled automatically. 1. Press MODE : Select Dry . 2. Press TEMP : Set the desired temperature. A C L Hi-POWER OPERATION9 To automatically control roo... »