Notice CANON SX-60

« t signal in accord with the signal from the computer. 7.Press the button again.P44 Adjust the input signal, focusing, keystone distortion, etc. automatically with the auto setup function. 8.Press the button.P52 Optimize the input signal with the auto PC function (Skip this step if the projector is projecting an image properly.) 9.Select the image mode with the button.P53-54 Select an appropriate image mode for projection. Specify the aspect ratio or display area in the [Aspect] menu as required (P55, 88). 10.Start the presentation.P76-81 Set the useful functions available during the presentation from the remote control. Turn off the projectorP58-59 Turn off the projector and unplug the power cord. Finishing the projection...3 AV Equipment 1.Install the projector.P30-31 Install the projector at the desired distance from the screen. Install batteries in the remote control (P27) 2.Connect the projector.P62-66 Connect the projector and the AV equipment with a cable* (see P36, 37 for the instruction on connecting a audio cable). 3.Turn on the projector.P38-39 Connect the power cord and turn on the projector. Adjust the height of the projecting image (P41). Select a display language when turning on the projector for the first time (P39). 4.Press the button.P44 Adjust the focus of the screen. 5.Set up the AV equipment. Turn on the AV equipment and play the video image. 6.Select the input signal by pressing the button.P68-70 Select DIGITAL VIDEO as the input signal for a digital video image.* For the other video image, go to step 7. 7.Press the button again.P68 Adjust the input signal, focusing, keystone distortion, etc. automatically with the auto setup function. 8.Select the image mode with the button.P53-54 Select an appropriate image mode for projection. Specify the aspect ratio or display area in the [Aspect] menu as required (P71, 88, 89). Turn off the projectorP58-59 Turn off the projector and unplug the power cord. *Connect the projector and the AV equipment with a HDMI/DVI cable to project a digital video image (P63). Finishing the projection...4 TABLE OF CONTENTS Table of Contents Quick Reference – How to start projection.............................................................2 Table of Contents...................................................................................................4 Safety Instructions..................................................................................................7 Safety Precautions.....................................................................................................8 AC Power Cord Requirement.........................................................................................11 Federal Communication Commission Notice.................................................................12 Canadian Radio Interference Regulations.....................................................................12 Lamp Handling Precautions....................................................................................13 Carrying/Transporting the Projector...............................................................................13 Installation Precautions..................................................................................................14 Features of the Multimedia Projector SX7/SX6/SX60/X700.................................15 Supplied Manuals and Symbols Used in This Manual........ »