Notice JANOME 744D

« omacorriente apropiado. No modifique el enchufe de ninguna forma. Pedal de Control YC-482J o TJC-150 para usar en la Máquina de Coser MyLock 744D (para el mercado de los EE.UU. solamente) NOTICE TECHNIQUE : Pour les appareils avec fiche polarisée (une lame plus large que l’autre) : pour réduire le risque de secousse électrique, cette fiche est conçue pour s’insérer dans une fiche polarisée d’une seule manière. Si la fiche ne s’insère pas complètement dans la prise, inverser la prise. Si elle ne convient toujours pas, contacter un électricien qualifié pour poser une prise appropriée. Ne pas modifier la prise de quelque façon que ce soit. Pédale de contrôle YC-482J ou TJC-150 pour l’emploi avec la machine à coudre MyLock 744D (pour marché américain seulement).1 IMPORTANT SAFETY INSTRUCTIONS Your sewing machine is designed and constructed only for HOUSEHOLD use. Read all Instructions before using this appliance. DANGER – To reduce the risk of electric shock: 1.An appliance should never be left unattended when plugged in. Always unplug this appliance from the electrical outlet immediately after using and before cleaning. 2.Always unplug before relamping. Replace bulb with same type rated 15 Watts. 3.Do not reach for the appliance that has fallen into water. Unplug immediately. 4.Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid. WARNING – To reduce the risk of burns, fire, electric shock,or injury to persons. 1.Do not allow to be used as a toy. Close attention is necessary when this appliance is used by or near children. 2.Use this appliance only for its intended use as described in this manual. Use only attachments recommended by the manufacturer as contained in this manual. 3.Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to the nearest authorized dealer or service center for examination, repair, electrical or mechanical adjustment. 4.Never operate the appliance with any air opening blocked. Keep ventilation openings of the sewing machine and foot controller free from accumulation of lint, dust, and loose cloth. 5.Never drop or insert any object into any opening. 6.Do not use outdoors. 7.Do not operate where aerosol (spray) products are being used or where oxygen is being administered. 8.To disconnect, turn all controls to the off (“ 0 ”) position, then remove plug from outlet. 9.Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. 10.Keep fingers away from all moving parts. Special care is required around the sewing machine needle and knives. 11.Always use the proper needle plate. The wrong plate can cause the needle to break. 12.Do not use bent needles. 13.Do not pull or push fabric while stitching. It may deflect the needle causing it to break. 14.Switch the sewing machine off (“ 0 ”) when making any adjustment in the needle area, such as threading needle, changing needle, threading loopers, or changing presser foot, and the like. 15.Always unplug the sewing machine from the electrical outlet when removing covers, lubricating, or when making any other adjustments mentioned in the instruction manual. SAVE THESE INSTRUCTIONS2 DIRECTIVES IMPORTANTES SUR LA SÉCURITÉ Cette machine à coudre est conçue et fabriquée uniquement pour l’usage DOMESTIQUE. Lire tou... »