Notice D-LINK DAP-2553

« or PC. A.Connect the power adapter to the receptor on the rear panel of the DAP-2553 and then plug the other end of the power adapter to a wall outlet or power strip. The power LED will turn ON to indicate proper operation. Using an Ethernet cable, insert one end of the cable to the LAN port on the rear panel of the DAP-2553 and the other end of the cable to a switch. Note: You can also connect the DAP-2553 directly to the computer that will be used for con?guration. The LAN LED will illuminate to indicate a proper Ethernet connection. Computers with 802.11 b/g/draft n wireless adapters can connect to the DAP-2553. B. A. Power Receptor Receptor for Power Adapter. C. D. Reset Reset the Access Point.4 1. You will need broadband Internet access. 2. Consult with your cable or DSL provider for proper installation of the modem. 3. Connect the Cable or DSL modem to a router. 4. If you are connecting a desktop computer to your network, install a wireless PCI adapter into an available PCI slot on your desktop computer. 5. Install the drivers for your wireless CardBus adapter into a laptop computer. Getting Started5 Connecting PoE (Power over Ethernet) Connect one end of an Ethernet cable (included with your package) to the LAN port on the DAP-2553 and the other end of the Ethernet cable to your computer or to your PoE switch. The AP can be powered on by a PoE switch or by the power adapter shipped with the AP.6 Using the Con?guration Menu First, disable the Access the Internet using a proxy server function. To disable this function, go to Control Panel > Internet Options > Connections > LAN Settings and uncheck the enable box. Start your web browser program (Internet Explorer, Mozilla Firefox). Please start your web browser program, type the IP address of the device (http://192.168.0.50) and press Enter. Make sure that the IP addresses of the device and the computer are in the same subnet. Then, refer to the manual for con?guration. Note: If you have changed the default IP address assigned to the DAP-2553, make sure to enter the correct IP address. • Type admin in the User Name ?eld.• Leave the Password ?eld blank.• Click the Login button. Note: If you have changed the password, make sure to enter the correct password. Technical Support United Kingdom (Mon-Fri) Home Wireless/Broadband 0871 873 3000 (9.00am–06.00pm, Sat 10.00am-02.00pm) Managed, Smart, & Wireless Switches, or Firewalls 0871 873 0909 (09.00am – 05.30pm) (BT 10ppm, other carriers may vary.) Ireland (Mon-Fri) All Products 1890 886 899 (09.00am-06.00pm, Sat 10.00am-02.00pm) €0.05ppm peak, €0.045ppm off peak Times Internet http://www.dlink.co.uk ftp://ftp.dlink.co.ukNotes 8 Lieferumfang Systemanforderungen Sollte einer der oben aufgeführten Artikel fehlen, wenden Sie sich bitte an Ihren Fachhändler. • Computer mit Windows®, Macintosh® oder Linux-basierten Betriebssystemen und installiertem Ethernet-Adapter • Internet Explorer Version 7.0 oder Firefox 3.0 oder höher (für Kon?guration) • D-Link DAP-2553 Wireless N Access Point • 3 abnehmbare Antennen • Netzteil • CAT5-Ethernetkabel • CD-ROM mit Installationsanleitung, Benutzerhandbuch und Sonderangeboten Hinweis: Die Verwendung eines Netzteils mit einer unterschiedlichen Spannung als jener des mit dem DAP-2553 mitgelieferten Netzteils könnte das Gerät beschädigen. In diesem Falle erlischt der Garantieanspruch für dieses Produkt.9 DAP-2... »