Notice ALTEC LANSING MX5020

Manuel ALTEC LANSING MX5020 disponible gratuitement après inscription

Le groupe d'entraide ALTEC LANSING MX5020 est ravi de partager cette notice avec vous

Notice d’utilisation de votre ALTEC LANSING MX5020. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre MX5020.

Notices - manuels - modes d'emploi disponibles pour ALTEC LANSING MX5020 après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

ack of the right satellite, and the other end to the headphone jack on your portable audio device. Console Gaming and TV (Requires the use of the Console Gaming Y-Adapter, which is not included. This adapter can be purchased at www.alteclansing.com.) Most console game systems feature dual-RCA outputs. To connect your speakers, follow the steps below: 1.Make sure the power to your console gaming system is turned off. 2.The Console Gaming Y-Adapter has a lime green 3.5 mm stereo jack on one end and two RCA jacks on the other —one red and one white. 3.Locate the red and white RCA plugs on the end of the cable connected to the back of your console gaming system. Connect them to the matching red and white RCA jacks on the Console Gaming Y-Adapter. 4.Connect one end of the lime green 3.5 mm stereo cable to the matching jack on the back of the right satellite, and the other end to the matching jack on the Console Gaming Y-Adapter. Powering On 1.After all other connections are made, plug one end of the power adapter into the back of the right satellite and the other end into the AC wall outlet. The speaker system is now ready to operate. 2.Turn on the audio source. 3.Access the controls by pressing on the LED/push button located on the right satellite. The door will automatically pivot 90 degrees. Note: To close the door, gently rotate it back to the closed position until you hear the “click” of the locking mechanism. You can choose to expose the controls by hiding the door under the satellite. To hide the door, lift the satellite and let the door swing automatically 270 degrees under the satellite. 4.Turn on the speaker system by turning the master volume knob clockwise on the right satellite until you hear a click sound. An LED will light on the...

En cours...