tteries from equipment that is not going to be used for a month or more. < When disposing of used batteries, please comply with governmental (or other) regulations that apply in your country or area. Using the remote control Please keep in mind the following when using the remote control: < Ensure that there are no obstacles between the remote control and the remote sensor on the AVP700. The remote has a range of about 7 metres. < Remote operation may become unreliable if strong sunlight or ? uorescent light is shining on the remote sensor of the AVP700. < Replace the batteries when you notice a reduction in the operating range of the remote control. ? ? 1. Open the cover of the remote control battery compartment 2. Insert the batteries into the remote control ? ? 3. Close the cover of the remote control battery compartmentAVP700 E-4 AVP700 E-5 English Before making connections Before connecting your equipment it is important to think about the following points, as these will affect your choice of connections and subsequent use of the system. Audio Wherever possible, connect both the analogue and digital outputs of digital sources. This enables use of a digital input for the main zone with the corresponding analogue input used for recording onto an analogue tape deck or VCR, or for the Zone 2 output. Video The AVP700 allows for conversion between different analogue video formats. This means that the AVP700 can convert between composite, S-video and component, if required. For example, if you are watching a composite input from a VCR, you may view it from the S-video or Component/RGB video outputs of the AVP700. This allows you to use a single (typically high-quality Component/RGB) connection between the AVP700 and your d...