Notice BOSCH HBL 3550 disponible gratuitement après inscription

Extrait de la notice

e between the side of the oven and the wall/door. For oven support, install 2x4’s extending front to back flush with the bottom and the side of the opening. The supporting base must be well secured to the floor/cabinet and level. Note: The conduit box must be located above the unit to facilitate connecting and servicing. The cabinet base must be flat and capable of supporting a weight of at least 310 lbs (141 kg). Combo Oven with Microwave and Warming Drawer 30” It is good practice, when oven is installed at the end of a cabinet run, adjacent to a perpendicular wall or cabinet door, to allow at least 1/4” space between the side of the oven and the wall/door. For oven support, install 2x4’s extending front to back flush with the bottom and the side of the opening. The supporting base must be well secured to the floor/cabinet and level. Note: The conduit box must be located above the unit to facilitate connecting and servicing. The cabinet base must be flat and capable of supporting a weight of at least 429 lbs (195 kg).English 8 Dimensions for 30” Under-the-counter- Units It is good practice, when oven is installed at the end of a cabinet run, adjacent to a perpendicular wall or cabinet door, to allow at least 1/4” space between the side of the oven and the wall/door. For oven support, install 2x4’s extending front to back flush with the bottom and the side of the opening. The supporting base must be well secured to the floor/cabinet and level. This Built –In Oven can be installed below any Bosch cook top as long as there is no contact between the bottom of the cook top and the top of the oven, except for the Bosch Induction cooktop, where the gap must be of at least 1 inch. 36" (915mm) 20" (508mm) 281/...