Notice BRAUN SI 6590 Free Style disponible gratuitement après inscription

Extrait de la notice

arting off •This iron is designed for tap water. If you have extremely hard water, we recommend to use a mixture of 50% tap water and 50% distilled water. Fill the water tank to «max» marking. Never use distilled water exclusively. Do not add any additives (e.g. starch). •Keep the iron in the upright position and connect it to the mains. Select the tem- perature according to the ironing guide on the heel rest of the iron or on the label in your garments. •The temperature pilot light (7) goes off, when the desired temperature is reached (after approx. 1 minute). CIroning 1 Steam on/off For steam ironing, the temperature selector (6) must be set within the red range. Press the steam button (3) to start the steam mode. steam on steam off With the steam button in its upper position, turn the steam regulator (3a) to adjust the steam quantity. Preconditioning (not with models SI 6210, SI 6510) Steam develops also horizontally at the front area of the sole plate. This pre- conditions the textiles by «pre-steaming», thus making ironing easier. Be careful – steam comes out laterally. 2 Power shot Prior to use, press the power shot button (5) 3 to 4 times to activate it. Press the power shot button in intervals of at least 5 seconds. Power shot can be activated when dry ironing. However, the temperature selector has to be set in the range between «•••» and «max». The power shot function can also be used in the vertical position for steaming hanging clothes. 3Spray function Press the spray button (4). 4Dry ironing Turn the steam mode off by pressing the steam button (3) so that it catches in the lower position. DAfter ironing •Unplug the iron and pr...