pervised. For indoor use only. Safety Reminding and Maintenance: 7 UK ENGLISH If the supply cord is damaged, it must be replaced by the manufacturer,its service agent or similary qualified person in in order to avoid a hazard.If any abnormality occurs, the induction hob will automatically go into protective mode and displayone of the following codes: E3/E4 AbnormaltemperatureCheck the pan The above table shows how to assess and check common faults.Do not dismantle the appliance yourself, otherwise you may damage the inductionhob. F0/F1/F2 E1/E2 E5/E6 Fan failureContact the supplier Temperaturesensor failure Contact the supplier Abnormal voltage inpower supply Check if power supply isnormal.Power on after power supplyreturns to normal. Poor heat radiationin cooking zone Restart when cookingzone cools down LightImmerse in hot water and wipe dryCleaning sponge Rings and limescale Sweetmeat, meltedaluminium or plastics Apply white vinegar to the area, wipe witha soft cloth or use a commerciallyavailable product Use a special scraper for ceramic glassto remove residue (a silicon product isbest) Special adhesive for ceramicglass Special adhesive for ceramicglass The surface of the induction hob may be easily cleaned in the following way: NB: Disconnect the power supply before cleaning. F3-F8 Type of contam-inationMethod of cleaningCleaning materials Cleanness and Maintenance Failure Display and Inspection Fault Possible cause Solutions If a fault should occur, before calling After Sales Service, please do the following: -Check that the appliance is correctly plugged in -Read the failure and display table above If you are still unable to resolve the problem, switch off the appliance, do...