Notice CANON Prima Zoom 80u disponible gratuitement après inscription

Extrait de la notice

the Date mode. 2Press the tbutton for more than 2 seconds for date/time set mode. 3Press the tbutton to select the setting position (numbers blinking). Setting position cycles through in the order year-month-day-hour-minute-(:). 4Press the wbutton to set the number. 5Repeat 3 and 4 above to set all digits of the date and time. Pressing the wbutton while “:” is blinking resets the seconds (:) setting to zero. 6Finish setting the date and time. Press the tbutton and once “:” stops blinking, date and time setting is completed. Press the mbutton and the power switches off. Date/time etc. imprinted here. <Year/Month/Day> <Month/Day/Year> <Day/Month/Year> <No data imprinted> <Day/Hour/Minute> Each time the wbutton is pressed, the number increases by one. If kept pressed, the number increases continuously. Setting the Date Setting the Time You can customize the functions listed below to suit your preferences or the photography conditions. 1Set the camera to Custom Function setting mode. With the power off, hold down the s button and press the hbutton. a“CF 1-0” appears on the LCD panel. 2Select a function. Each time you press the wbutton, the Custom Function number changes in the cycle shown below. 3Set the function. Press the hbutton to change the setting display to 1 (function enabled). Press the hbutton again to change the setting to 0 (function disabled). Turning the power on completes the settings. CF1:Real-time Release Refer to yShooting in Real Timefor information on using the Real-time Release function. CF2:Shooting Mode and Flash Mode Memory Stores the shooting mode and the flash mode in memory immediately before the camera is switched off. Useful when you always want to set the shooting mode...