Notice COLEMAN Event 14 Shelter disponible gratuitement après inscription

Extrait de la notice

canopy and wrap around poles to secure. (Fig. 11) 8.Position Pad Feet at the four corners (determined with the use of the Corner Locator in Step 1) as shown. (Fig. 12) NOTE:Pad Feet must angle in toward center of shelter with metal ring facing outward. Metal Ring Fig. 12 Fig. 13 9.Insert ends of Poles into Pad Feet and twist until metal pin locks into slot (Fig. 13). 10.Repeat for other three Pad feet locations. NOTE:Make sure the metal rings on the Pad Feet are facing out. Fig. 18Fig. 19 Fig. 15Fig. 16 Fig. 17 Angle faces inward MetalPin inslot 14.Attach hook end of Canopy tension strap to the metal ring on the Pad Feet. Repeat for the remaing three Pad Feet. Pull down strap, at each corner, to tighten. (Fig. 18 & 19) 13.Locate all velcro straps on the seams on the inside of the Canopy. Undo straps, wrap around Poles and secure tightly. (Fig. 17) 15.Attach Guy Lines to web loops located on outside seams of Canopy then secure with stakes. (Fig. 20) Fig. 14 Web Loop Guy Line Stake Fig. 20 Optional Sunwalls may be placed in any of the arched openings of the Shelter. See your local retailer or visit www.coleman.com to order. 6.Unfold Canopy and pull over frame. Fold back one flap on canopy to allow easy access to inside of shelter frame and under- side of canopy. (Fig. 10) 12.Wrap web straps around Pole at all four corners and hook snap-in buckles. Pull strap, at each corner, to tighten. (Fig. 15 & 16) 11.Drive stakes through holes in Pad Feet to secure. (Fig. 14) NOTE:Coleman provides 2 stakes per Pad Foot. Soil type may dictate the use of more stakes. Extra stakes may be purchased at any local sporting goods dealer. Completed Shelter 14_EventShade-A4.qxd 10/10/06 11:30 PM Page 2...