Notice DELL Optiplex 745 disponible gratuitement après inscription

Extrait de la notice

er — Back-Panel Connectors 3voltage selection switchYour computer is equipped with a manual voltage-selection switch. To help avoid damaging a computer with a manual voltage-selection switch, set the switch for the voltage that most closely matches the AC power available in your location. NOTICE: The voltage selection switch must be set to the 115-V position even though the AC power available in Japan is 100 V. Also, ensure that your monitor and attached devices are electrically rated to operate with the AC power available in your location. 4power connectorInsert the power cable. 5back-panel connectorsPlug serial, USB, and other devices into the appropriate connectors (see "Mini Tower Computer — Back-Panel Connectors" on page11). 6card slotsAccess connectors for any installed PCI and PCI Express cards. 13 987 5 6 24 1parallel connectorConnect a parallel device, such as a printer, to the parallel connector. If you have a USB printer, plug it into a USB connector. NOTE: The integrated parallel connector is automatically disabled if the computer detects an installed card containing a parallel connector configured to the same address. For more information, see your online User’s Guide. 2link integrity light•Green — A good connection exists between a 10-Mbps network and the computer. •Orange — A good connection exists between a 100-Mbps network and the computer. •Yellow — A good connection exists between a 1-Gbps (or 1000-Mbps) network and the computer. •Off — The computer is not detecting a physical connection to the network.12Quick Reference Guide 3network adapter connector To attach your computer to a network or broadband device, connect one end of a network cable to either a network jack or your network or broadband device....