Notice DELONGHI HCO620F disponible gratuitement après inscription

Extrait de la notice

e brackets “E” into the base of the heater and fixing them to the holes in the wall using the screws. Now your heater is mounted on the wall. The appliance must not be positioned directly underneath a fixed power point. Position the appliance in such a way that the plug is easily accessible even after installation. 4. Operation and use Turning on Plug into the mains, turn the thermostat dial (B) to maximum and turn the appliance on by means of the power selector (A) as described below. •Turn the selector to the Min position to select minimum power (the Min power light comes on). •Turn the selector to the Medposition to select medium power (the Med power light comes on). •Turn the selector to the Maxposition to select maximum power (the Max power light comes on). 5. Adjusting the thermostat When the room has reached the required temperature, turn the thermostat dial (B) slowly anticlockwise until the lights go out and no further. The thermostat will automatically regulate the temperature set and keep it constant. In spring or autumn or on mild days, you can save energy by using minimum power. 6. Frost prevention mode With the thermostat dial in the position and one of the power levels selected, the appliance maintains room temperature at about 5°C, preventing freezing with minimal energy consumption. 7. Models with fan A number of models have a fan for faster more even heating. To use this function, turn the power selector (A) to the Max position (the corresponding light comes on). 8. Models with 24 hour timer (C) To set the heating periods proceed as follows: •Check the time on your clock or watch. If it is 10.00 for example, turn the numbered programmer disk until the number 10 coincides with the pointer ? marked on the programmer. •...