Notice DYNEX DX-E402 disponible gratuitement après inscription

Extrait de la notice

If the result displayed is similar to what is shown in this example, the connection between your computer and your router has been established. - OR -16Appendix - FAQ If the result displayed is similar to what is shown in this example, your computer has not connected to your router. If so, refer to the following for a solution. Is the connection between your computer and your router correct? The Link/Act LEDs of the LAN port on your router and LEDs on your computer's network adapter should be lit. Is the TCP/IP configuration for your computer correct? If your router's IP address is 192.168.1.1, your computer's IP address must be within the range of 192.168.1.2 ~ 192.168.1.254, and the gateway must be 192.168.1.1 I’m an ADSL user. How do I configure my router to access the Internet? To configure your router to access the Internet:1Configure the ADSL modem to the RFC1483, or similar, bridge model. 2Connect the Ethernet cable from your ADSL modem to the WAN port on your router. The telephone cord plugs into the Line port of the ADSL modem. 3Log in to your router, click Network on the left of your browser, then click WAN. The WAN page opens. 4On the WAN page, select PPPoE for WAN Connection Type. Enter the user name password, then click Connect. The Internet Connection Mode page opens. 5If Time-based Connecting is checked, select Connect on Demand or Connect Manually for Internet connection mode. Type an appropriate number for Max Idle Time to avoid wasting paid time. Otherwise, you can select Auto-connecting for Internet connection mode.Appendix - FAQ17 Notes: - Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time, since some applications visit the Internet continually in the background. - If you are a cable user,...