Notice Danby DDR6009REE disponible gratuitement après inscription

Extrait de la notice

dispose of the batteries in a fire as they may explode. OPERATINGINSTRUCTIONS REMOTECONTROL PLACINGBATTERIESINREMOTECONTROL 1 2 3 4 5 7 www.sylvane.com 1-800-934-91942)Insert the plug into a suitable wall socket(Fig. 1) The dehumidifier is suitable for operating on an electricity supply havingthe same voltage as that shown on its rating label. 3)Make sure the water tank is correctly located. After switching onthe machine for the first time, if the “Bucket Full”light illuminates,pull out the water tank, and check that the “float”lever is able tomove freely, then return the water tank to the correct position (Fig.2). Fig. 1 Fig. 2 When the water tank is full and/or incorrectly positioned inside the cabinet, the waterfull red light turns on and remains on until such time that the tank is emptied and/orcorrectly re-positioned. This condition will result in the immediate shut down of the dehumidifying system (both compressor and fanmotor operations are terminated). This is a safety feature. When the water tank is emptied and/or correctly re-positioned, the dehumidifier will resume operation automatically. NOTE:It may take several minutes before operating conditions resume. The water tank should be carefully removed from the machine by sliding it outward from the front of the unit, and it should be emptied. When the emptytank is replaced properly in the machine, the unit will start up and run normally(Fig. 3). Please use both hands to carefullyempty thewater tank. Fig. 3 Each time the unit is disconnected/re-connected and/or in the event of a power failure, the electronic circuitboard automatically defaults to the following factory setting:Humidity Setting:60%Fan Speed:Low NOTE:In the event of a power failure, all previous settings are automatically e...