Notice ENERMAX Platimax disponible gratuitement après inscription

Extrait de la notice

be compatible and might cause damage to your PSU and/or system, and use of third party cable shall void PSU warranty. EMC014-G: 2 x 6+2P (8P) PCI-E 2.0 Modular cable for 1 or 2 performance PCI Express graphic cards, which needs 6P or 8P PCI-E connector. EMC019-G: 4 x SATA drives Modular cable for SATA/SAS drives like ODD and HDD. EMC020-G : 4 x 4P Molex (IDE/SCSI) drives & 1 x FDD connector Modular cable for IDE/SCSI/SAS drives and peripheral, plus 1 FDD power connector. 6 EMC021-G: 2 x SATA & 2 x 4P Molex Modular cable for SATA/SAS/IDE/SCSI drives and other peripherals. Special note for System Integrators: If your system requires special modular cable configuration or design, please contact an ENERMAX sales representative. z ATTACHING / DETACHING THE MODULAR CABLES Attaching the modular cable to PSU 5-pin / 12-pin connector on modular cable and PSU’s modular socket has an arrow mark. To make correct connection is easy: 1. Black connector to black socket, and red to red. 2. Arrow mark to arrow mark. 3. Then you can easily plug in the connector. Detaching the modular cable from PSU 5-pin / 12-pin connector on modular cable has two hooks to lock with the PSU’s modular sockets. When unplug the modular cable from PSU, please press two hooks together and gently pull out the cable. BOOTING YOUR SYSTEM Before booting your system, please check that: 1. Main power connector (24P) is properly connected. 2. CPU +12V power connector (4 or 8P configuration), and/or a 4P Molex connector (if required by MB) is properly connected. 3. All other needed connectors are properly connected. 4. AC cord is properly connected to wall outlet and PSU AC inlet. 5. Close your system chassis. 6. Turn on the PSU by...