Notice ENERMAX Revolution 85+ 950W disponible gratuitement après inscription

Extrait de la notice

IDE/SCSI/SAS drives or some AGP graphic card with traditional 4P power in socket. FDD For floppy drive or certain add-on card. FM (FAN RPM MONITOR) # 3 For 13.5cm fan RPM detection. Fan speed for 850 / 950 / 1050W models: 700-1500RPM (±10%). Fan speed for 1250W model: 800-1800RPM (±10%). ENGLISH 6 #1 Some SATA drives might accept SATA or 4P Molex power. Normally, use either one of power connector to power the driver, BUT NOT BOTH! Please check the drive’s manual for details. #2 Some MB might require this connector to share the +12V current from 24-pin Mainboard connector to PCI-E slot. If your MB already supports 24-pin Mainboard connector, you may not need to add the 4P Molex connector on it. Please check the MB’s manual for details. #3 Most MB offer 2 ~ 4 3-pin system/PSU fan power sockets, but only one or two socket(s) might support the fan RPM signal. If you connect the PSU FM connector on the MB, but BIOS or system monitor software cannot read the PSU fan RPM, please relocate the PSU FM connector to another socket. MODULAR CABLES SUPPLIED Use ONLY genuine ENERMAX modular cables coming with ENERMAX PSU. Third party cables might not be compatible and might cause damage to your PSU and/or system, and use of third party cable shall void PSU warranty. EMC012: 3 x 4P Molex (IDE/SCSI) drives Modular cable for IDE/SCSI/SAS drives and other peripherals. EMC013: 3 x 4P Molex (IDE/SCSI) drives & 1 X FDD connector Modular cable for IDE/SCSI/SAS drives and peripheral, plus 1 FDD power connector. EMC014: 2 x 6+2P (8P) PCI-E 2.0 Modular cable for 1 or 2 performance PCI Express graphic cards, which needs 6P or 8P PCI-E connector. EMC017: 4 x SATA drives Modular cable for SATA/SAS drives like...