Notice FRANCIS X1 disponible gratuitement après inscription

Extrait de la notice

other coffees I)To make other coffees, repeat operations E to H. How to obtain steam (making a cappuccino) J)Ensure that there is no serving in the filterholder. With the steam valve (7) in a closed position, turn on the steam switch (2). If the temperature pilot light (6) was not already on, this operation will make it come on. K) After turning off the temperature pilot light (6), open the steam valve (7) slightly, by turning anti- clockwise, and release the residual water from the pipe (9) until the steam arrives. When steam starts to come out, close the valve (7). L)Place a recipient with the milk under the steam- cappuccino outlet pipe (9) so that part of it is immersed. Then open the steam valve (7) to obtain the steam required. A special hole at the side of the nozzle makes it possible for a small portion of air to be absorbed, which, mixing with the milk, transforms it into foam for cappuccino. If this does not occur, alter the position of the recipient so that the air absorption hole (17) is not covered by the milk. It is preferable to use very cold milk. Turn off the steam switch (2). If you note a reduction in the supply of steam, close the steam valve (7) and turn on the coffee switch (3) until water comes out of the filter- holder (8). Then repeat steps K and L. M) It is very important to avoid making an espresso immediately after the steam is supplied, as the machine is still too hot. To reduce the temperature of the machine quickly and obtain a perfect espresso, follow the instructions below: - Ensure that there is no serving in the filterholder. - Turn on the coffee switch (3) and put a recipient under the filter-holder (13) enabling the hot water to come out until the temperature pilot...