40) and DIGITAL OUTPUT JACK (42). They cannot be used when the PHONO/LINE SWITCH (41) is set to PHONO. 7.The PLATTER (2) is equipped with a STROBE RPM INDICATOR STRIP (26) and the POWER SWITCH (16) contains built in STROBE LIGHTS (27). When the PLATTER (2) is spinning, the STROBE LIGHTS (27) illuminate the STROBE RPM INDICATOR STRIP (26). The bottom row of dots will appear to be stationary when the pitch is -3.3%. The second row of dots from the bottom will appear to be stationary when the speed is exactly 33 1/3, 45 or 78 RPM depending on which SPEED SELECTOR BUTTONS (18) are pushed. The third row of dots from the bottom will appear to be stationary when the pitch is +3.3%. The top row of dots will appear to be stationary when the pitch is +7.2%. USING THE REVERSE BUTTON: 1.Press the REVERSE BUTTON (29) to reverse the rotation of the PLATTER (2) (the REVERSE LED (30) will light while in reverse mode). Press the REVERSE BUTTON (29) a second time to return to normal play. DIGITAL DISPLAY: 1.The DIGITAL DISPLAY (20) indicates PITCH PERCENTAGE & BPM. The BPM/PITCH BUTTON (37) allows you to select what you would like displayed, either the PITCH PERCENTAGE or the BPM. L (WHITE) R (RED) MIXER OR RECEIVER OUTPUT CONNECTORS LEFT CHANNEL RIGHT CHANNEL-6- ARM-LIFT HEIGHT ADJUSTMENT: If the pre-adjusted distance that the CUE LEVER (19) raises the stylus off the record surface is inadequate, it can be adjusted by turning the ARM-LIFT HEIGHT ADJUSTMENT SCREW (28) while simultaneously pushing down on the TONE ARM (6). Clockwise rotation of the screw will decrease the distance and counter-clockwise rotation will increase the distance. BRAKE AND TORQUE CONTROLS: The adjustable BRAKE BUTTON (38) allows you to vary the speed at which the PLAT...