Notice GEMINI X-3 disponible gratuitement après inscription

Extrait de la notice

peration. For clean sound reproduction, the CLIP LED (19) should only light occasionally for an instant. If the LED remains on or flashes repeatedly, you will hear distorted sound that can be damaging to your speaker systems. If this occurs, reduce the signal level by lowering the input level control for the channel that is clipping or reduce the level at the source. If the CLIP LED (19) lights when no signal is present, it may indicate an DCsignal on the output which may cause damage to speakers (the DC signal will not be audible). Please note that when you are using the amplifier in the MONO BRIDGE mode, both CLIP LED (19) of the bridged channels will operate simultaneously. LEVEL CONTROLS: LEVEL CONTROLS (20, 21) establish the input levels required for each channel. Only the CHANNEL 1 LEVEL CONTROL (20) works in MONO BRIDGE mode. OPERATION: STEREO OPERATION: THE AMPLIFIER’S POWER MUST BE TURNED OFF WHEN CHANGING MODES OF OPERATION. The unit has two channels for stereo operation. Each channel provides a separate and discrete signal at the speaker outputs according to the signal received at the inputs. The following instructions are for applications with 4 Ohm or 8 Ohm speakers of matched power ratings. 1.With the power off, set the OPERATION MODE SWITCH (5) to the STEREO position. INTRODUCTION: Congratulations on purchasing a Gemini Power Amplifier. This state of-the-art power arnplifier includes the latest features and is backed by a three year limited warranty. Prior to use, we suggest that you carefully read all the instructions. FEATURES: •State-of-the-art bi-polar output stage technology for the finest sound quality and reliability •High output power to drive professional loudspeakers without clipping •Comprehensive protection ci...