Notice HP LaserJet 1022NW disponible gratuitement après inscription

Extrait de la notice

ion about the network configuration settings, such as the IP address. When the printer is in the Ready state, press and hold the GO button until the Ready light starts blinking. NOTEIf the IP address on the configuration page is 0.0.0.0, then wait a few minutes and then print the configuration page again. Do this until the IP address is not 0.0.0.0. The printer will have an IP address based on your personal network configuration. For example, the IP address might look like 192.168.x.y, where the x and y can be any numbers between 0 and 255. 5.Insert the CD into a computer that is linked to the network. Follow the on-screen installation prompts. In the Model dialog box, select the HP LaserJet 1022nw. In the Printer Connection dialog box, select the Connected via wireless option. 6.After the installation is complete, make sure that the network cable is disconnected. 18Chapter2Setting up the printerENWWNetwork components for a Windows ad-hoc (peer-to-peer) network installation You will need the following components to perform an ad-hoc installation: 1Functioning ad-hoc wireless network 2HP LaserJet 1022nw Wireless Printer Getting Started Guide (this document) 3CD-ROM containing the installation software and the HP LaserJet 1022nw Wireless Printer User Guide 4Power cord Procedure for a Windows ad-hoc (peer-to-peer) network installation Please read the entire procedure before starting an ad-hoc wireless network installation. For best results, follow the instructions in the order listed. NOTEHP highly recommends that you have an existing ad-hoc network or that you configure one before starting this installation method. 1.Preparing the printer a.Close all applications on your computer. b.Plug the printer into a power outlet and turn the printer on....