Notice IBANEZ Ibz15GR disponible gratuitement après inscription

Extrait de la notice

ON/OFF switch for the power supply. The LED lights when the power supply is turned on. Warning Before you turn on the power of the amp, make sure that volume control is set to 0. If you turn on the power when the volume controls are already raised, a sudden loud noise may be produced, possibly damaging your hearing. Please use caution. Troubleshooting 1. The power supply cannot be switched on. • Check that the power cable has been connected correctly. • Try plugging it into a different socket and see if the same problem occurs. 2. The power supply can be switched on, but no sound is produced. • Check that the guitar has been connected correctly. • Remove the effects between the guitar and the amplifier and check to see if no sound is produced. • Replace the shielded cable and check to see if no sound is produced. • Check to see if the volume on the guitar is set to ‘0’. • Use a different guitar and see if no sound is produced. • Check to see if the volume on the amplifier is set to ‘0’. • Check to see if the headphones are connected. 3. Noise is heard. • Check to see if anything in the immediate vicinity is resonating or banging against the amplifier to produce the noise. • Check to see if the plug cover on the shielded cable is loose. • Check that the string action (distance between strings and frets) is correctly adjusted (not too low). • Use another guitar, effects and cable to see if the same noise is produced. 4. No sound is produced in the headphones. • Check that the headphone jack is connected correctly. • Connect another set of headphones and see if sound is produced. In the case of defects This product has passed exhaustive inspections before being shipped from the factory. Ensure that the above procedures are carri...