Notice IBANEZ P3115

Notice IBANEZ P3115 disponible gratuitement après inscription

Accédez à la notice du IBANEZ P3115 en adhérant à la communauté.

Notice d’utilisation de votre IBANEZ P3115. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre P3115.

Notices - manuels - modes d'emploi disponibles pour IBANEZ P3115 après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

ich the Pre-Clip LED just starts to illumi- nate when your hardest notes are played. 3. Low / Mid / High 4. Phat By turning the knob clockwise you will boost the low and high frequency range while scooping the middle frequency range. This is beneficial for a va- riety of sounds including slap bass. At its minimum position, the frequency response is flat. 5. Master After setting Gain control, adjust this control to the level you required. To avoid signal clipping, monitor the Power-Clip LED while adjusting. 6. Power / Clip LED This LED shows the power amp status. When this LED lights red, the power amp is clipping. This LED lights green when there is no clipping at the power amp. 7. Limiter This button turns on the internal limiter. The internal limiter will automatically limit your signal once it passes a certain threshold to avoid power amp distor- tion. The Power / Clip LED lights RED when the signal passes the threshold. 8. Aux 3.5mm stereo mini jack. This jack is designed to be connected to the head- phone output of a portable CD or MP3 player, or similar device. Use the volume control of your portable player along with the volume control on the amp to adjust the desired volume. 9. Phones 3.5mm stereo mini output jack for stereo headphones. The sound is not re- produced through the built-in speaker when headphones are in use. The LIN- EOUT signal will still produce output. Warning: This phones output can produce lots of volume. Ensure that the MASTER and AUX VOLUME has been turned down before beginning to play using the headphones, and then slowly increase the volume until it has reached the desired level. Note inserting or removing headphones at high volume levels may result in damage to the headphon...

En cours...